OD=STANDARD_GPIO_OUTPUT, HYS=DISABLE_, MODE=INACTIVE_NO_PULL_DO, FUNC=SELECTS_FUNCTION_R_, ADMODE=ANALOG_INPUT_MODE
I/O configuration for pin R/PIO1_0/AD1/CT32B1_CAP0
| FUNC | Selects pin function. All other values are reserved. 0 (SELECTS_FUNCTION_R_): Selects function R. This function is reserved. Select one of the alternate functions below. 1 (SELECTS_FUNCTION_PIO): Selects function PIO1_0. 2 (SELECTS_FUNCTION_AD1): Selects function AD1. 3 (SELECTS_FUNCTION_CT3): Selects function CT32B1_CAP0. |
| MODE | Selects function mode (on-chip pull-up/pull-down resistor control). 0 (INACTIVE_NO_PULL_DO): Inactive (no pull-down/pull-up resistor enabled). 1 (PULL_DOWN_RESISTOR_E): Pull-down resistor enabled. 2 (PULL_UP_RESISTOR_ENA): Pull-up resistor enabled. 3 (REPEATER_MODE_): Repeater mode. |
| HYS | Hysteresis. 0 (DISABLE_): Disable. 1 (ENABLE_): Enable. |
| RESERVED | Reserved |
| ADMODE | Selects Analog/Digital mode 0 (ANALOG_INPUT_MODE): Analog input mode 1 (DIGITAL_FUNCTIONAL_M): Digital functional mode |
| RESERVED | Reserved |
| OD | Selects pseudo open-drain mode. 0 (STANDARD_GPIO_OUTPUT): Standard GPIO output 1 (OPEN_DRAIN_OUTPUT): Open-drain output |
| RESERVED | Reserved |